1. product pro?le 1.1 general description 500 ma npn resistor-equipped transistors (ret) family. [1] also available in sot54a and sot54 variant packages (see section 2 ). 1.2 features 1.3 applications 1.4 quick reference data pdtd123y series npn 500 ma, 50 v resistor-equipped transistors; r1 = 2.2 k w , r2 = 10 k w rev. 01 12 april 2005 product data sheet table 1: product overview type number package pnp complement philips jeita jedec pdtd123yk sot346 sc-59a to-236 pdtb123yk pdtd123ys [1] sot54 sc-43a to-92 pdtb123ys pdtd123yt sot23 - to-236ab pdtb123yt n built-in bias resistors n reduces component count n simpli?es circuit design n reduces pick and place costs n 500 ma output current capability n 10 % resistor ratio tolerance n digital application in automotive and industrial segment n cost saving alternative for bc817 series in digital applications n controlling ic inputs n switching loads table 2: quick reference data symbol parameter conditions min typ max unit v ceo collector-emitter voltage open base - - 50 v i o output current (dc) - - 500 ma r1 bias resistor 1 (input) 1.54 2.2 2.86 k w r2/r1 bias resistor ratio 4.1 4.55 5
9397 750 14584 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 12 april 2005 2 of 10 philips semiconductors pdtd123y series npn 500 ma resistor-equipped transistors; r1 = 2.2 k w , r2 = 10 k w 2. pinning information table 3: pinning pin description simpli?ed outline symbol sot54 1 input (base) 2 output (collector) 3 gnd (emitter) sot54a 1 input (base) 2 output (collector) 3 gnd (emitter) sot54 variant 1 input (base) 2 output (collector) 3 gnd (emitter) sot23, sot346 1 input (base) 2 gnd (emitter) 3 output (collector) 001aab347 1 2 3 006aaa145 2 3 1 r1 r2 001aab348 1 2 3 006aaa145 2 3 1 r1 r2 001aab447 1 2 3 006aaa145 2 3 1 r1 r2 006aaa144 12 3 sym007 3 2 1 r1 r2
9397 750 14584 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 12 april 2005 3 of 10 philips semiconductors pdtd123y series npn 500 ma resistor-equipped transistors; r1 = 2.2 k w , r2 = 10 k w 3. ordering information [1] also available in sot54a and sot54 variant packages (see section 2 and section 9 ). 4. marking [1] * = -: made in hong kong * = p: made in hong kong * = t: made in malaysia * = w: made in china 5. limiting values [1] device mounted on an fr4 printed-circuit board (pcb), single-sided copper, tin-plated and standard footprint. table 4: ordering information type number package name description version pdtd123yk sc-59a plastic surface mounted package; 3 leads sot346 pdtd123ys [1] sc-43a plastic single-ended leaded (through hole) package; 3 leads sot54 pdtd123yt - plastic surface mounted package; 3 leads sot23 table 5: marking codes type number marking code [1] pdtd123yk e7 pdtd123ys d123ys pdtd123yt *7x table 6: limiting values in accordance with the absolute maximum rating system (iec 60134). symbol parameter conditions min max unit v cbo collector-base voltage open emitter - 50 v v ceo collector-emitter voltage open base - 50 v v ebo emitter-base voltage open collector - 5 v v i input voltage positive - +12 v negative - - 5v i o output current (dc) - 500 ma p tot total power dissipation t amb 25 c [1] sot346 - 250 mw sot54 - 500 mw sot23 - 250 mw t stg storage temperature - 65 +150 c t j junction temperature - 150 c t amb ambient temperature - 65 +150 c
9397 750 14584 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 12 april 2005 4 of 10 philips semiconductors pdtd123y series npn 500 ma resistor-equipped transistors; r1 = 2.2 k w , r2 = 10 k w 6. thermal characteristics [1] device mounted on an fr4 pcb, single-sided copper, tin-plated and standard footprint. 7. characteristics table 7: thermal characteristics symbol parameter conditions min typ max unit r th(j-a) thermal resistance from junction to ambient in free air [1] sot346 - - 500 k/w sot54 - - 250 k/w sot23 - - 500 k/w table 8: characteristics t amb =25 c unless otherwise speci?ed. symbol parameter conditions min typ max unit i cbo collector-base cut-off current v cb =40v; i e = 0 a - - 100 na v cb =50v; i e = 0 a - - 100 na i ceo collector-emitter cut-off current v ce =50v; i b =0a - - 0.5 m a i ebo emitter-base cut-off current v eb =5v; i c = 0 a - - 0.65 ma h fe dc current gain v ce =5v; i c =50ma 70 - - v cesat collector-emitter saturation voltage i c = 50 ma; i b = 2.5 ma - - 0.3 v v i(off) off-state input voltage v ce =5v; i c = 100 m a 0.4 0.6 1 v v i(on) on-state input voltage v ce = 0.3 v; i c = 20 ma 0.5 1 1.4 v r1 bias resistor 1 (input) 1.54 2.2 2.86 k w r2/r1 bias resistor ratio 4.1 4.55 5 c c collector capacitance v cb =10v; i e =i e =0a; f=1mhz -7-pf
9397 750 14584 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 12 april 2005 5 of 10 philips semiconductors pdtd123y series npn 500 ma resistor-equipped transistors; r1 = 2.2 k w , r2 = 10 k w v ce = 5 v (1) t amb = 100 c (2) t amb = 25 c (3) t amb = - 40 c i c /i b = 20 (1) t amb = 100 c (2) t amb = 25 c (3) t amb = - 40 c fig 1. dc current gain as a function of collector current; typical values fig 2. collector-emitter saturation voltage as a function of collector current; typical values v ce = 0.3 v (1) t amb = - 40 c (2) t amb = 25 c (3) t amb = 100 c v ce = 5 v (1) t amb = - 40 c (2) t amb = 25 c (3) t amb = 100 c fig 3. on-state input voltage as a function of collector current; typical values fig 4. off-state input voltage as a function of collector current; typical values 006aaa322 10 2 10 10 3 h fe 1 i c (ma) 10 - 1 10 3 10 2 110 (1) (2) (3) (1) (2) (3) 006aaa323 i c (ma) 110 2 10 10 - 1 v cesat (v) 10 - 2 006aaa324 i c (ma) 10 - 1 10 3 10 2 110 1 10 v i(on) (v) 10 - 1 (1) (2) (3) i c (ma) 10 - 1 10 1 1 10 v i(off) (v) 10 - 1 006aaa325 (1) (2) (3)
9397 750 14584 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 12 april 2005 6 of 10 philips semiconductors pdtd123y series npn 500 ma resistor-equipped transistors; r1 = 2.2 k w , r2 = 10 k w 8. package outline fig 5. package outline sot346 (sc-59a/to-236) fig 6. package outline sot54 (sc-43a/to-92) fig 7. package outline sot54a fig 8. package outline sot54 variant fig 9. package outline sot23 (to-236ab) 04-11-11 dimensions in mm 3.0 2.5 1.7 1.3 0.26 0.10 12 3 1.9 0.50 0.35 1.3 1.0 3.1 2.7 0.6 0.2 04-11-16 dimensions in mm 5.2 5.0 14.5 12.7 4.8 4.4 4.2 3.6 0.45 0.38 0.48 0.40 1.27 2.54 3 2 1 04-06-28 dimensions in mm 5.2 5.0 14.5 12.7 4.8 4.4 4.2 3.6 0.45 0.38 0.48 0.40 2.54 5.08 3 max 3 2 1 05-01-10 dimensions in mm 5.2 5.0 14.5 12.7 4.8 4.4 4.2 3.6 0.45 0.38 0.48 0.40 1.27 1.27 2.54 2.5 max 3 2 1 04-11-04 dimensions in mm 0.45 0.15 1.9 1.1 0.9 3.0 2.8 2.5 2.1 1.4 1.2 0.48 0.38 0.15 0.09 12 3
9397 750 14584 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 12 april 2005 7 of 10 philips semiconductors pdtd123y series npn 500 ma resistor-equipped transistors; r1 = 2.2 k w , r2 = 10 k w 9. packing information [1] for further information and the availability of packing methods, see section 14 . table 9: packing methods the indicated -xxx are the last three digits of the 12nc ordering code. [1] type number package description packing quantity 3000 5000 10000 pdtd123yk sot346 4 mm pitch, 8 mm tape and reel -115 - -135 pdtd123ys sot54 bulk, straight leads - -412 - sot54a tape and reel, wide pitch - - -116 tape ammopack, wide pitch - - -126 sot54 variant bulk, delta pinning - -112 - pdtd123yt sot23 4 mm pitch, 8 mm tape and reel -215 - -235
9397 750 14584 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 12 april 2005 8 of 10 philips semiconductors pdtd123y series npn 500 ma resistor-equipped transistors; r1 = 2.2 k w , r2 = 10 k w 10. revision history table 10: revision history document id release date data sheet status change notice doc. number supersedes pdtd123y_ser_1 20050412 product data sheet - 9397 750 14584 -
philips semiconductors pdtd123y series npn 500 ma resistor-equipped transistors; r1 = 2.2 k w , r2 = 10 k w 9397 750 14584 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 12 april 2005 9 of 10 11. data sheet status [1] please consult the most recently issued data sheet before initiating or completing a design. [2] the product status of the device(s) described in this data sheet may have changed since this data sheet was published. the l atest information is available on the internet at url http://www.semiconductors.philips.com. [3] for data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. de?nitions short-form speci?cation the data in a short-form speci?cation is extracted from a full data sheet with the same type number and title. for detailed information see the relevant data sheet or data handbook. limiting values de?nition limiting values given are in accordance with the absolute maximum rating system (iec 60134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the speci?cation is not implied. exposure to limiting values for extended periods may affect device reliability. application information applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors make no representation or warranty that such applications will be suitable for the speci?ed use without further testing or modi?cation. 13. disclaimers life support these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors for any damages resulting from such application. right to make changes philips semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. when the product is in full production (status production), relevant changes will be communicated via a customer product/process change noti?cation (cpcn). philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise speci?ed. 14. contact information for additional information, please visit: http://www.semiconductors.philips.com for sales of?ce addresses, send an email to: sales.addresses@www.semiconductors.philips.com level data sheet status [1] product status [2] [3] de?nition i objective data development this data sheet contains data from the objective speci?cation for product development. philips semiconductors reserves the right to change the speci?cation in any manner without notice. ii preliminary data quali?cation this data sheet contains data from the preliminary speci?cation. supplementary data will be published at a later date. philips semiconductors reserves the right to change the speci?cation without notice, in order to improve the design and supply the best possible product. iii product data production this data sheet contains data from the product speci?cation. philips semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. relevant changes will be communicated via a customer product/process change noti?cation (cpcn).
? koninklijke philips electronics n.v. 2005 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. date of release: 12 april 2005 document number: 9397 750 14584 published in the netherlands philips semiconductors pdtd123y series npn 500 ma resistor-equipped transistors; r1 = 2.2 k w , r2 = 10 k w 15. contents 1 product pro?le . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 general description. . . . . . . . . . . . . . . . . . . . . . 1 1.2 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.4 quick reference data. . . . . . . . . . . . . . . . . . . . . 1 2 pinning information . . . . . . . . . . . . . . . . . . . . . . 2 3 ordering information . . . . . . . . . . . . . . . . . . . . . 3 4 marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 5 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 thermal characteristics. . . . . . . . . . . . . . . . . . . 4 7 characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 8 package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6 9 packing information. . . . . . . . . . . . . . . . . . . . . . 7 10 revision history . . . . . . . . . . . . . . . . . . . . . . . . . 8 11 data sheet status . . . . . . . . . . . . . . . . . . . . . . . . 9 12 de?nitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 13 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 14 contact information . . . . . . . . . . . . . . . . . . . . . 9
|
